Thursday, September 25, 2014

Marine Equipment Cataloque Vol.12

Hatches, Portlights & Ventilation
724
DRI-Z-AIR
Removes unwanted excess moisture, guards against
mildew, dry rot, dampness. Easy to use, odourless and
nonflammable.
DZU
Container and crystals
DZCRY
Refill crystals, 13 oz Bag
DZA-60
Refill crystals, 60 oz Jug
DZA-160
Refill crystals, 160 oz Jug
DRYWAVE 100
Air dryer for small spaces up to 100 cubic feet.
Ideal for preventing mold and mildew in small spaces such as
heads, gear lockers. The energy efficient design draws less than
20 watts and its compact size can be positioned horizontally or
vertically. 120V, 20watts. 8.5" x 2".
IWP0152
DRYWAVE
Air dryer for spaces to 1000 cubic ft
State of the art design and safety features
Gently warms and dries the air to prevent the formation of mold and
mildew on wall surfaces
Thermal cut out switch for safety
Designed for continuous operation
Energy efficient; draws same power as a household light bulb
Dimensions: 13.5”L x 10.5”W x 4”H
120V, 120Watts
IWP0151
STOR-DRY
The Stor-Dry low wattage warm air
circulator is the "must have" product
for the winterization season. The
model 9406 Stor-Dry combats
mold, mildew and musty odors
in any boat that is closed up or
winterized. This dual action air dryer
uses a low wattage heating element
and internal fan to both heat and circulate
the air. The heat and circulation prevents stale air pockets
which in turn prevents mold or mildew forming on the interior
surface of the boat. 120VAC 90 Watt. 2 year warranty
9406
MATTRESS VENTILATION PAD
HyperVent is a practical solution for the prevention of dampness
(condensation) forming beneath boat beds, under cushions, in
closets & more. HyperVent is a special material that consists of a
white spun polymer woven into a large open configuration that is
bonded to a breathable white fabric layer. This light mesh of polymer
does not compress, allowing an open layer of air to form. It is 3/4"
thick, allowing plenty of dry air to circulate. HyperVent is lightweight
and flexible, yet rigid enough to hold its shape indefinitely.
HyperVent prevents dampness in three ways:
1.
Allows warm air to circulate under the mattress, thereby
minimizing an essential condition for condensation.
2.
The circulating air promotes evaporation of moisture.
3.
Separates the bedding from any moisture that might form.
HyperVent features:
The semi-rigid structure that elevates the mattress and bedding
Allows nearly unobstructed air flow
Easy to cut (scissors work fine)
Easy to join in order to make any required extended width
Easy to clean and dry
Very light weight (4.3 oz. per square yard!)
Easy to roll up or bend through tight passageways
Virtually maintenance-free
Outlasts the life of any mattress
Unaffected by freezing temperatures
Sold in full rolls (39" x 50') only
HYPV1
AIR-DRYR
Designed to operate
anywhere, 24 hours a
day. Place Air-Dryr on
the floor in any damp,
enclosed space and plug
into a 110/120 volt outlet.
The damp air is heated to
the point moisture is held
in suspension (above the
dew point), then released
through the top vents of
the device. As warmed
air rises, cooler damp
air is drawn in, where it too is heated. Air Dryr costs no more to operate
than the burning of a light bulb. A thermal cutoff turns the unit off should
air flow be impeded. Polycarbonate housing. 120VAC.
DAV1459
Air Dryr 500, 500 cubic feet, 70 watts (0.6A)
DAV1458
Air Dryr 1000, 1000 cubic feet,130 watts (1.1A)
TRUE NORTH HEATER
• 2 speed fan / 3 heat settings
• 600/900/1500 Watts w/thermostat
• Antifreeze setting
• 5 year warranty
• 120VAC
• Dual overheat protection
• CSA Certified
9206

No comments:

Post a Comment